garage doors il chicago land: May 2020

Friday 29 May 2020

Easy Garage Door Repair Tips to Help You Save Money

Doing a garage door repair is one of the most difficult things to face especially if you are not familiar with technical DIY home repairs. Because garage doors are a combination of complicated electronics, hard-to-understand mechanical workings and hard-to-handle materials, most people shy away from doing these repairs and just leave it to a door technician to fix the job. The problem is, repairing of the doors in your garage might cost you a lot of money. A simple garage door installation already costs close to a thousand dollars, Hiring technicians to repair your door's simple problems will only add up to your expenses.

Major repairs such as panel and door spring replacements will usually call for the help of expert technicians. But as much as possible, you must first try and see if you can fix the problems on your own before you go out and look for help. In the case that you have a screeching garage metal door that causes a lot of noise when opened or closed, the first things that you have to check are rusty hardware and old door screws. People do not realize it but half of the time, it is the combination of rusty hardware and old screws that serves as the culprit when it comes to the problem of screeching garage doors. If you are able to check these little issues first before calling out the technician to do the minor repair, you might be able to save a lot of money.

If you have a door in your garage that does not fully go down when it is closed and it springs right back up before even reaching the ground, the main culprit is usually a misplaced door sensor. A door sensor that is not placed properly will most certainly cause your garage door to do unwarranted acts such as not closing down 100%. To fix this, just place your door sensors a little lower than your current placement. You might also want to check if there are objects and hindrances blocking the sensor because it can also contribute to the said problem.

Doing a door repair for your garage is not an easy task especially if you are not an "electronics" or "mechanics" kind of person. But you must also put in mind that doing simple DIY door repairs will not hurt especially if the problems are too trivial to even call a door technician. Sometimes, a non-working door might even be fixed by simply replacing the batteries of your door opener. If you want to be frugal and save more money in the bank, learning simple DIY repairs of your garage is a must.

Find Garage door repair in cities mentioned below:

Thursday 28 May 2020

Garage Door Repair - 5 Simple Things to Check

Garage door repair may often be done by the homeowner themselves. There are at least 5 simple things to check, before calling a professional. Some repairs are extremely easy. For example, a stiff or a squeaky door will merely require a good cleaning and lubrication. Other repairs, such as repairing a torsion spring, are extremely dangerous and require help from a professional.

Before proceeding to the repair, make sure to unplug your garage door opener, so that you do not get an electric shock while you are repairing your garage door. You will most likely be standing on a ladder, which is a very bad place to get an electric shock, since you may also fall off the ladder. Also, remember to wear safety glasses when working with power tools.

Here is a list of things to check before calling for a professional for your garage door repair:

1. Check the Metal Tracks for Damages

This easy garage door repair tip may often solve the problem very fast. The metal tracks often may have dents or bumps. If you find any such damages, strike the damaged part of the track with a wood block and a hammer to straighten the track.

2. Check the Alignment of the Tracks

If the tracks are not aligned well, they may be causing the door not to work. It's not always necessary to unscrew the tracks; you can just try to loosen the bolts or screws and to tap the tracks slightly into position. Use a level to check the alignment of the tracks. Aligned tracks will let you be done with your garage door repair in no time.

3. Clean and Dry the Tracks

Even though it may sound obvious, but hardened dirt and old lubricant may be the cause of the garage door sticking. In this case, your garage door repair may consist of merely cleaning the tracks and then drying them. You can use regular cleaners to clean the tracks.

4. Lubricate the Tracks and the Rollers

Merely lubricating both, the tracks and the rollers, can fix the problem and conclude your garage door repair in no time. For lubrication, you may use a lubricant spray or a silicon spray. It is probably better to lubricate the tracks after cleaning them. Actually, any movable part will benefit from lubrication.

5. Tightening the Loose Bolts and Screws

Bolts and screws tend to become loose with time. Try to check all of the screws and bolts involved in the opening/closing mechanism of your door. Sometimes, merely tightening them may solve the whole problem. If you cannot tighten the screws, because the holes themselves have become loose, then you can use a "wood filler" or pieces of normal wood to fill the holes.

What Not to Do?

If you have tried every one of the above solutions, and none of them have worked, the problem may be the door spring. However, it is advised not to perform your garage door repair if the problem seems to be the spring, especially if it's a torsion spring. Unfortunately, there have been numerous cases, where people have gotten injured or even killed by the garage door springs. One of the most common injuries is a hit in the head, resulting in serious trauma to the brain.

Find Garage door repair in cities mentioned below:

Wednesday 27 May 2020

Tips for Garage Door Repair

Garage doors should be maintained the whole year round. This will help ensure that they will efficiently work. In this light, you should immediately address the small problems that as to do with them. If not, these small problems may progress to serious ones that may require you to shell out large amounts of money. There are only a few things that you have to look out for if your garage door is not properly functioning as it should and you see no loose parts lying on the floor of your garage. This article will present you with some tips on how to repair them.

Door Panel Tightening
First, you may need to tighten the door panels. Continued use of the garage implies that this home addition is regularly subjected to vibrating forces. Eventually, these forces can take their toll on the door by loosening up fasteners and brackets after a certain period of time. To help you tighten these fasteners for your door, you should use a socket or a wrench for the repair. In case it is directly connected to your garage door opener, you should disconnect the lines first by pulling on your emergency release handle. Using this method can help close the panels. In turn, the rest of the components will hold tight against one another. In this regard, you should also tighten up the hinges attach to your it. Missing nuts and bolts warrant immediate replacement and garage door repair to prevent disruptions in garage operations.

Pulleys and Rollers: Considerations
You should also check out the rollers attached to your door. If you can spin the stems using your fingers without meeting strong resistance in the process, there is a great chance that your door is functioning well. On the other hand, frozen rollers in the hinge may mean problems in gliding forces and friction involved in garage door operation. To help you address this problem through garage repair, you may add a drop or two of oil intended for door components. Steel rollers will especially require you to apply one or two drops of oil so you can keep your bearings lubricated. You should check out the roller inside the track of your garage door. If your rollers appear to be worn out, you should immediately replace them with new ones. If your garage has springs that span the sides, you should thoroughly inspect the pulleys.

Find Garage door repair in cities mentioned below:

Tuesday 26 May 2020

Why Is My Garage Opener Not Working? - 5 Common Reasons Why Your Garage Not Working

Are you having trouble opening and closing your garage door with your garage remote? Don't freak out: we've got the top 5 reasons why your garage isn't working, including their easy and quick fixes.

5 Reasons Why Your Garage Door Opener Isn't Working

1. Your garage door is manually locked.

Your garage may have been manually locked and therefore unable to respond to your remote. Double-check that the manual lock is disengaged before exploring other potential issues.

2. Your garage's sensors are dirty or broken.
Your garage sensors that stretch from one wall frame to the other. If these sensors pick up any object or movement, the sensors send a signal to the opener to stop closing. It's meant as a safety measure to ensure that children and pets aren't accidentally caught underneath the door. Your sensors may be the problem if your garage opens, but it doesn't close. If that's the case, your sensors might be dirty or broken, in which case, they'll need to be fixed in order to work normally again.

3. You've got broken torsion springs.
Is your garage refusing to lift at all? Your door's torsion springs might be the problem. These springs are heavy-duty devices that help lift the door - and like any piece of equipment, they can get rusted or break over the course of several years. If you hear a loud bang while opening your garage, that's probably one of your torsion springs breaking. In this case, it's important to call a professional right away, as it can be dangerous to fix torsion springs on your own.

4. Your dis Connector was accidentally enabled.
The disconnect switch is a failsafe that allows you to manually open your garage in case your house loses power. You can tell if the disconnect switch is the problem if you hear the garage opener motor running, but your door isn't moving at all. This is a quick fix in that you can disable the disconnect switch by attaching the disconnect rope back to your garage (make sure you do it when the door is fully open or closed).

5. Your battery is dead.
Last but not least, check to see if the batteries in your remote are actually working. You'd be surprised at the number of people who run through the gamut of reasons why their garage door might not be opening, only to have the problem simply come down to dead batteries. If your garage opens but only when you step closer to the door, this is a surefire sign that your batteries are running out of juice. Swap them out to quickly solve this issue.

Still Having Garage Door Opener Problems?
If nothing's blocking your garage door and you've looked at all of the above reasons, it's time to call a professional. A local family owned and operated company will be able to provide an estimate on your repair.

Find Garage door repair in cities mentioned below:

10 Tips to Help You Repair Your Wooden Garage Door

Some problems can be solved with simple methods. And these methods can help you save a lot of time and money. The same applies to the tips we are going to share with you. With these tips, you will find it much easier to repair your wooden garage door. If you know nothing about mechanics, we suggest that you look for a professional instead.

1. Check the Sensor

In most cases, doors tend to stop working because of faulty sensors. At times, it's just a placement issue. So, what you should need to do is check the location and position of the sensor first. Try placing it in a lower position. Next, keep all the objects away from it. When the sensor is blocked, it may create problems.

2. Faulty Door Opener

If you have problems with the remote or opener, chances are that the batteries need to be replaced. In some cases, the fixing system may be the culprit. Although it may be tempting to change the batteries, you may have to work on the door machinery, which is quite complex.

3. Get a helping hand

For a DIY job, make sure you get a helping hand. The reason is that you may not be able to lift the door unless you are a big guy. Besides, having a helping hand is a great idea if you want to be on the safe side. Plus, if there is someone to help you, there is a less likelihood of things breaking during the repair process.

4. Make necessary Adjustments

If you find it hard to open or close the door, all you need to do is adjust the force configurations. You can use the knob to adjust the settings.

5. Use the limit switch

An easy way out is to make an adjustment to the limit switch. You can find this switch in the rear of the track. Don't forget to re-recheck it.

6. Lubricate the door and other parts

Your garage door should be properly lubricated. A clear sign of a lack of lubrication is the noise produced by the door when it is moved. Plus, the door may have stability issues as well.

7. Perform Safety Maintenance

Make it a habit to check your door annually. This will help you identify and fix the issues before they turn into a bigger problem.

8. Keep It Clean

All the parts including the tracks should be clean. If they are not clean, you can use a house cleaner to do the cleaning. This is a simple method to ensure there is no dirt or grease.

9. Replace the Springs

An easy way to find out if the springs need to be replaced is to disconnect the power. After the power is disconnected, if the door is difficult to open or close, you need to replace the springs.

10. Ask For Professional Help

If you have followed the above tips but the problem is still there, we suggest that you look for a good professional for assistance.

Find Garage door repair in cities mentioned below: